67-72 2 pc. Inner Fenders

SOLD AS A PAIR!

Our Inner Fenders will not work with factory hood hinges unless the spring is removed. They work with any aftermarket hood hinge. We have Ringbrothers, Eddie Motorsports, and CVF hood hinges available on our website. We have the inner fenders available with no cut outs for customers using the Porterbuilt firewall mounted hood hinges.

The battery will need to be relocated.

Porterbuilt firewall mounted hood hinges are sold separately on our website.

Our inner fenders can be installed over the factory wheel wells. (See pics) We remove them when laying frame.

The bead rolled pattern in the pics is the pro touring bead roll.

(Two piece) means that there is a top panel and a bolt on drop down panel.

Mounting hardware is included.

Inner fenders are designed to be mounted at the top of the fender lip for maximum tire clearance (see pics) You will need to trim the lip on the bottom of the hood to clear the inner fender. Some customers have mounted the inner fender lower. 

We highly suggest going with the “cut to fit’ option for the passenger side top panel. Depending on weather you have a firewall kit or a stock firewall, that area will fit the panel differently. Cutting it yourself will ensure a proper fit. The drivers side is always the same. 

Instructions! 

Bolt the mounting brackets to the inner fenders then set them in place in the truck. Mark on the truck fender where the mounting brackets need to be attached. Then remove the inner fender and remove the mounting brackets. Attach the mounting brackets to the truck fender, and now you can bolt your inner fenders in place. Install drop down panels.